Protecting images – Canon S80 User Manual
Page 106
104
3
Use the or button to select
,
,
or .
z
Settings can be made by turning the multi
control dial.
z
The Setup menu closes.
Protecting Images
You can protect important images from accidental erasure.
1
In the [
(Play)] menu, select
[Protect] and press the FUNC./SET
button.
See Selecting Menus and Settings (Basic
Guide: p. 16).
2
Use the or button to select an
image you want to protect and
press the FUNC./SET button.
z
The
icon appears on protected images.
z
To remove the protection, press the FUNC./
SET button again (in protection mode).
z
You can make the selection of images easier
by toggling between single image playback and index playback with the
zoom lever.
z
During index playback, press the zoom lever toward
to jump nine
images at a time. To select or deselect images, press the zoom level
toward
to remove the Jump Bar (p. 89), then proceed.
z
Settings can be made by turning the multi control dial.
Please note that formatting (initializing) a memory card erases all
data (p. 23), including protected images and other file types. Please
check the contents of a memory card before formatting it.
EC176CUG_E.book Page 104 Tuesday, June 28, 2005 12:40 PM