Canon S80 User Manual
Page 111
109
Print Settings/Tran
sfer Settings
6
1
In the [
(Play)] menu, select
[Print Order] and press the FUNC./
SET button.
See Selecting Menus and Settings (Basic
Guide: p. 16).
You can select it by turning the multi control dial.
2
Use the , , or button to
select [Set up] and press the
FUNC./SET button.
z
All print settings for the image are canceled
when you select [Reset].
z
Settings can be made by turning the multi
control dial.
3
Use the or button to select
[Print Type], [Date] or [File No.] and
select settings with the or
button.
Print Type
z
Select [Standard], [Index] or [Both].
Date
z
Select [On] or [Off].
File No.
z
Select [On] or [Off].
4
Press the MENU button.
The Setup menu closes and the Print Order menu reappears.
z
When [Print Type] is set to [Index], the [Date] and [File No.] cannot
be set to [On] at the same time.
z
If you selected [Standard] or [Both] as the [Print Type], you can
also set the [Date] and [File No.] settings to [On] at the same time.
However, the data that is supported may vary among printers.
The date prints as the date and time in the format specified in the Set
[Date/Time] menu (p. 30).
EC176CUG_E.book Page 109 Tuesday, June 28, 2005 12:40 PM