Canon S80 - Manual (Page 24)

22
When the Auto Power Down Function Activates
Turn the power on again.
Playback/Printer Connection mode: Press the
button again to power
the camera.
When the Display Off Function Activates
The LCD monitor display turns back on if any button is pressed.
1
Select [Power Saving] in the
[
(Set up)] menu and press the
FUNC./SET button.
See Selecting Menus and Settings (Basic
Guide: p. 16).
2
Use the or button to select
[Auto Power Down] and select [On]
or [Off] with the or button.
Settings can be made by turning the multi
control dial.
3
Use the or to select [Display Off] and select the desired
time with the or button.
Settings can be made by turning the multi control dial.
4
Press the Menu button.
Display Off (Shooting Mode Only)
The LCD monitor shuts off after a specified period of time elapses
and no camera control is accessed.The following time settings can
be selected: 10 sec./20 sec./30 sec./1 min.
*
/2 min./3 min.
* Default setting
‹
Please note that the camera continues to consume a minimal amount
of power even when the power saving function shuts it down.
‹
The power saving function is disabled while a slide show plays on the
camera or during a computer connection (Basic Guide: p. 21, p. 99).
EC176CUG_E.book Page 22 Tuesday, June 28, 2005 12:40 PM