Canon S80 - Manual (Page 20)

18
*1 This is displayed in the no information display mode.
*2 Zoom powers reflect the combined optical and digital zoom effects.
Optical zoom is displayed in white up to "3.6x", the optical telephoto
limit. It does not appear when "digital zoom" is disabled. When digital
zoom is enabled, the zoom value is displayed in blue.
*3 "0" appears when no more recording space is available for either still
images at the current resolution or remaining movie time. When both
recording capacities are full, the "Memory card full" message appears.
*4 This is not normally displayed. It appears when camera shake occurs
when the shutter button is pressed lightly (halfway).
*5 Appears only when shooting movies.
Playback Information- Mode
‹
Even in the no information display mode, shooting information appears
for approximately 6 seconds when changing shooting settings etc.
(shooting information may not appear depending on the camera
settings at that time).
‹
When there is insufficient illumination the (camera shake warning)
icon appears in red on the LCD monitor and the lower Indicator blinks
in orange while the camera is preparing to shoot. Use one of the
following shooting methods.
- Set the flash settings to enable automatic or normal firing
- Fix the camera to a tripod
- Raise the ISO speed
Playback file number/
Total number of images
Sound Memo (WAVE file) (p. 97)
Protection Status (p. 104)
File number
Shooting Time
Compression/Resolution (p. 33)
Data Type, etc. (p. 41)
EC176CUG_E.book Page 18 Tuesday, June 28, 2005 12:40 PM