Cary Audio Design HD1080P - Manual (Page 14)

CONTROLS AND DISPLAYS
13
REAR PANEL
1. RIGHT CHANNEL ANALOG OUTPUT JACK (AES/EBU Balanced)
• Use this jack for connection to the amplifier's right channel balanced input jack.
2. RIGHT CHANNEL ANALOG OUTPUT JACK (RCA Unbalanced)
• Use this jack for connection to the amplifier's RCA right channel unbalanced input jack.
3. LEFT CHANNEL ANALOG OUTPUT JACK (RCA Unbalanced)
• Use this jack for connection to the amplifier's RCA left channel unbalanced input jack.
4. LEFT CHANNEL ANALOG OUTPUT JACK (AES/EBU Balanced)
• Use this jack for connection to the amplifier's left channel balanced input jack.
5. HDMI OUTPUT JACK
• Use this jack to connect to a TV, Monitor or AV receiver that has an HDMI input.
6. 480p-1080p PROGRESSIVE COMPONENT VIDEO OUTPUT JACKS
• Use these jacks to connect to a TV, Monitor or AV receiver that has progressive
component video capability and inputs. The connectors used for this are BNC
connections. BNC > RCA adapters are available if your display uses RCA connections.
7. RGB+HV SYNC VIDEO OUTPUT JACKS
• Use these jacks to connect to a TV, Monitor or AV receiver that has RGB+HV SYNC
video inputs. These are BNC connections. Consult your dealer about matching cables.
8. 480i INTERLACED COMPONENT VIDEO OUTPUT JACKS
• Use these jacks to connect to a TV, Monitor or AV receiver that has interlaced
component video capability and inputs. The outputs for this section use RCA
connections, with 75 Ohm cable (not included).
9. S-VIDEO OUTPUT JACK
• Use this jack to connect to a TV, Monitor or AV receiver that has an S-VIDEO input. An
S-video cable is needed to use this connection (not included).