Cary Audio Design HD1080P - Manual (Page 28)

CHANGING THE DEFAULT SETTINGS
27
PROGRESSIVE SETUP
Choose Progressive Setup and press ENTER. Use the UP
 , DOWN  , LEFT  , and
RIGHT  cursor buttons to navigate the options within Progressive Setup. When making
changes, navigate to the desired selection and press ENTER. Press the LEFT  arrow to return
to the list of options within Progressive Setup. To exit Progressive Setup, choose the SETUP
button to return to the main SETUP menu.
...........................................................................................................................................................................
COMPONENT
Use this to select the YUV component output mode.
480P/576P (Factory default)
YUV (480P/576P) component video signal is output from
COMPONENT PROGRESSIVE OUTPUT terminals. 480P is NTSC
progressive and 576P is PAL progressive.
720P
YUV (720P) component video signal is output from COMPONENT PROGRESSIVE OUTPUT
terminals.
1080i
YUV (1080i) component video signal is output from COMPONENT PROGRESSIVE OUTPUT
terminals.
1080P
YUV (1080P) component video signal is output from COMPONENT PROGRESSIVE OUTPUT
terminals.
Note: There will be no image shown on the display if it is not capable of working at
the chosen video setting. Do not try to use incorrect video settings for your display to
avoid potential damage to the video display. Refer to the instruction manual of the TV
or display to be connected to the unit for detailed information regarding the
component jacks.