Cary Audio Design HD1080P - Manual (Page 16)

CONTROLS AND DISPLAYS
15
REMOTE CONTROL
This section explains how best to use the remote control to set up and operate the DVD player.
1. OPEN/CLOSE: Use to open or close the tray.
2. NUMBER BUTTONS
3. GO TO: Use to skip to specified title, chapter or
time. Press GO TO, then the track or Chapter
number, and then press PLAY.
4. ANGLE: Use to change the camera angle during
DVD multi-angle scene playback.
5. SETUP: Use to show and hide the set up menu.
6. UP/DOWN/LEFT/RIGHT & ENTER: Use to
navigate on-screen displays and menus. Press
ENTER to select an option or execute a
command.
7. OSD DISPLAY: Use to display information
about the disc playing.
8. STOP: Use to stop the disc.
9. PAUSE: Use to pause playback; press again to
resume playback.
10. POWER: Use to switch the player ON or into
standby.
11. SUBTITLE: Use to select a subtitle display.
12. AUDIO: Use to select the audio channel or
language.
13. MENU: Use to display the top menu of a DVD
disc.
14. TITLE: Use to display a DVD disc menu or the
Disc Navigator of a DVD-RW, CD, Video CD or Mp3 disc.
15. PLAY: Use to start or resume playback.
16. PREVIOUS/NEXT: Use to jump to the start of the previous/next chapter/track.
17. REVERSE/FORWARD: Use to reverse/forward slow motion playback, frame reverse/advance
and reverse/forward scanning.
18. ZOOM +/- BUTTONS: Use to enlarge and reduce the screen image.
19. VOLUME: Use to adjust the level when the variable volume setting is activated in the SET
UP menu.