Cary Audio Design HD1080P - Manual (Page 30)

CHANGING THE DEFAULT SETTINGS
29
AV SYNC
Choose AV SYNC Setup and press ENTER. Use the UP  , DOWN  , LEFT  , and
RIGHT  cursor buttons to navigate the options within AV SYNC Setup. When making changes,
navigate to the desired selection and press ENTER. Press the LEFT  arrow to return to the list
of options within AV SYNC Setup. To exit AV SYNC Setup, choose the SETUP button to return to
the main SETUP menu.
...........................................................................................................................................................................
DIGITAL OUT DELAY
Use this to select the digital audio output delay time setting.
(TOSLINK & COAXIAL digital audio output only)
Use this to set the DIGITAL VIDEO and DIGITAL AUDIO OUTPUT
so they are synchronized.
0 (Factory default)
No delay is output.
1 - 600 MS
You can select from 1 to 600 ms time delay in the digital audio
output. Video processing of a DVD disk to a higher video
setting, for example 720p progressive output, takes a little bit
of extra time. If you notice any timing discrepancy between the
sound and the video image you can adjust the timing of the AV
SYNC circuit to keep the video action and the audio signal “in
synch”.