Powering on the projector – Compaq MP1400 User Manual
Page 18
Advertising
MP1400 Microportable Projector
1-11
Part Number: part number 177284-001 - Writer: Marianne Silvetti - Saved by: Marianne Silvetti
Pages: 18 Words: 2366 Saved date: 05/12/004:32 PM File Name: Chap1.doc
Powering On the Projector
Follow these instructions to power on the projector:
1. Ensure that the power cord and signal cable are
securely connected.
✎
Make sure the projector is perpendicular to the projection
screen.
2. Remove the lens cap
1 from the projector by pulling
it straight out.
3. Turn on the Main power switch
2 on the back of the
projector and allow the projector to warm up for one
to two minutes.
✎
When the projector has warmed up, the Compaq startup
screen displays, and the LED on the STANDBY button
3 turns
green.
Advertising