Compaq MP1400 - Manual (Page 54)

5-6 MP1400 Microportable Projector
Part Number: part number 177284-001 - Writer: Marianne Silvetti - Saved by: Marianne Silvetti
Pages: 6 Words: 970 Saved date: 05/12/004:34 PM File Name: Chap5.doc
5. Use the provided Phillips screwdriver to remove the
screw
4 from the lamp cover.
6. Remove the cover
5.
7. On the left side of the lamp module, push the
electrical connector
6 up to disengage it from the
projector base.
8. Remove the three screws
7 from the lamp module.
9. Pull out the lamp module
8.
! WARNING: To reduce the risk of personal injury, do not drop
the lamp module or touch the glass bulb. The glass may
shatter and cause an injury if it is dropped.
To replace the lamp module, reverse the previous steps.
✎ After replacing the lamp module, remember to reset the lamp
hours in the on-screen menu.
IMPORTANT: This lamp contains < 0.125 percent mercury by
weight. If the projection lamp breaks, the mercury may be released
into the atmosphere. Please follow applicable federal, state, and
local regulations for disposal and/or recycling.