Compaq MP1400 - Manual (Page 39)

3-6 MP1400 Microportable Projector
Part Number: part number177284-001 - Writer: Marianne Silvetti - Saved by: Marianne Silvetti
Pages: 8 Words: 1051 Saved date: 05/12/004:32 PM File Name: Chap3.doc
Connecting a Video Player
✎ If your video player uses a round, one-prong composite video
connector, use the RCA video cable. If your video player uses
a round, four-prong S-video connector, use the S-video cable.
Both cables are included with the optional Compaq
Multimedia Adapter.
1. Plug the RCA video cable into the video-out port on
the video player and the video port on the video
adapter. If you are using the S-video cable, connect it
to the S-video out connector on the video player and
the S-video port on the video adapter.
2. Turn on the projector first, then the video player.
3. Push the Source button on the back of the
multimedia adapter to toggle and switch the projector
signal from data (computer icon) to video (TV icon).
The data mode receives computer inputs, and the
video mode receives video input such as a TV tuner,
VCR, video, or camera.
With the optional Compaq Multimedia Adapter attached, the
projector is compatible with major video standards such as NTSC,
PAL, and SECAM. Use the on-screen menu to adjust the video
performance manually, or press the Resync button on the projector
panel to optimize it automatically.
Video On-Screen Menu Adjustments
When the optional Multimedia Adapter is attached to the projector
and the video source is selected, an alternate video on-screen menu
can be displayed on the projected screen. This menu includes some
selections that are relevant to the multimedia functions of the video
adapter.
To display the Video on-screen menu:
1. Attach the optional Compaq Multimedia Adapter to
the projector.
2. Attach a video source to the projector.