Charging the battery, Remove the cover. insert the battery, Charge the battery – Canon SX200 LS User Manual
Page 14: Remove the battery
14
Use the included charger to charge the battery.
Remove the cover.
Insert the battery.
●
Align the S marks on the battery and
charger, then insert the battery by sliding it
in
and down
.
Charge the battery.
●
For CB-2LX: Flip out the plug
and plug
the charger into a power outlet
.
●
For CB-2LXE: Plug the power cord into
the charger, then plug the other end into a
power outlet.
X
The charge lamp lights red and charging
starts.
●
The charge lamp will light green when
charging has finished. Charging takes
approx. 2 hours and 5 minutes.
Remove the battery.
●
Unplug the battery charger from the power
outlet, then remove the battery by sliding it
in
and up
.
Charging the Battery
CB-2LX
CB-2LXE
To protect the battery and prolong its life, do not charge it for longer than
24 hours continuously.