Canon SX200 LS - Manual (Page 138)

138
You can customize convenient and commonly used functions from the 3
tab (p. 48) .
Turning off the Power Saving Function
You can set the power saving function (p. 53) to [Off]. Setting it to [On] is
recommended to save battery power.
● Select [Power Saving], then press the m
button.
● Press the op buttons or turn the  dial to
select [Auto Power Down], then use the
qr
buttons to select [Off].
● If you set the Power Saving function to [Off],
be careful not to forget to turn off the camera
after use.
Setting the Screen Shut-Off Time
You can adjust the time the screen takes to shut off automatically (p. 53) .
This also works when [Auto Power Down] is set to [Off].
● Select [Power Saving], then press the m
button.
● Press the op buttons or turn the  dial to
select [Display Off], then use the qr buttons
to select a time.
● In order to save battery power, it is
recommended to select less than [1 min.].
Changing Functions