Check the edited movie, Save the edited movie – Canon SX200 LS User Manual
Page 108
* Editing
108
X
Even if you move to a point other than a
point, only the portion from the
nearest
to the left will be trimmed
when
is selected. Only the portion
from the nearest
to the right will be
trimmed when
is selected.
X
The light blue section selected with will
be the section of the movie that remains
after editing.
Check the edited movie.
●
Press the
op buttons to select
, then
press the
m button. The edited movie will
play.
●
To edit the movie again, repeat Step 2.
●
To cancel editing, press the
op buttons,
and select
. After pressing the
m
button, press the
qr buttons or turn the
 dial to select [OK], and press the m
button again.
Save the edited movie.
●
Press the
op buttons to select
, then
press the
m button.
●
Press the
qr buttons or turn the  dial
to select [New File], then press the
m
button.
X
The movie will be saved as a new file.
•
When [Overwrite] in Step 4 is selected, the unedited movie is overwritten
with the edited movie, erasing the original movie.
•
When there is not enough space left on the memory card, only
[Overwrite] can be selected.
•
If the battery is depleted partway through editing, the edited movie clips
may not be saved. When editing movies, you should use a fully charged
battery or the separately sold AC adapter kit
.