Canon SX200 LS - Manual (Page 121)

121
You can protect important images so that they cannot be erased by the
camera
(pp. 28 , 118) .
Select
:.
● Press the m button to select : in the
FUNC. menu, then press the m button
again.
Make the setting.
● Press the qr buttons or turn the  dial,
select [Protect] and press the m button.
X Once set, will appear on the screen.
Select Range
Select [Protect].
● Press the n button, select the 1 tab
and [Protect], and then press the m
button.
Select [Select Range].
● Press the op buttons or turn the Â
dial, select [Select Range] and press the
m button.
● Follow Steps 2 and 3 on p. 119 to select
images.
: Protecting Images
If you format the memory card (p. 52) , protected images will also be
erased.
• Protected images cannot be erased with the camera’s erase function. To
erase an image, cancel protection first.
• You can also protect images using the following method. Press the
n button, select the 1 tab, select [Protect]. Press the m button to
select [Select] and press the
m button again, then press the qr
buttons to select an image and press the m button.