Canon SX200 LS - Manual (Page 114)

114
You can magnify the area of a recorded image that was inside the AF frame
or the area of a face that was detected to check the focus.
Press the
l button, and switch
to the focus check display (p. 45) .
X A white frame will appear where the AF
frame or face was when the focus was set.
X A gray frame will appear on a face
detected during playback.
X The area within the orange frame appears
magnified.
Change the magnification level or
location.
● Move the zoom lever toward k once.
X Use the zoom lever to change the display
size, and the
opqr buttons to change the
display position while checking the focus.
Switch frames.
● Pressing the m button will switch to a
different frame.
● Pressing the n button resets the
display to Step 1.
Checking the Focus