Crestron electronic 3200 - Manual (Page 21)

CRESTRON
System View of the CNXRY-16 and CT-3200 in SIMPL Windows’ Configuration Manager
Programming Manager
Use the Programming Manager workspace (Project | Program System) in SIMPL
Windows to select symbols and assign their respective signals. For this example, a
CT-3200 and CNXRY-16 symbols were added automatically when the devices were
added to the system in the Configuration Manager workspace. Expand the Network
Modules folder and double click on the touchpanel for a detail view (alternatively
CTRL+D or drag and drop into Detail View). Assign signals as shown below.
Detail View of the CT-3200 in SIMPL Windows’ Programming Manager
NOTE: For a more descriptive symbol name, as shown in the illustration above,
right mouse click on the touchpanel icon in the Network Modules folder in Program
View and select Edit Symbol Comment (alternatively, highlight the icon and
depress Ctrl+R or Tab). Enter a new descriptive name in the “Enter Symbol
Comment” dialog box and click OK.
Operations Guide - DOC. 5725 Series 3200 Touchpanels • 17