Crestron electronic 3200 - Manual (Page 22)

CRESTRON
Expand the Central Control Modules folder and double click on the CNXRY-16 for a
detail view (alternatively CTRL+D or drag and drop into Detail View). Assign
signals as shown below.
Detail View of the CNXRY-16 in SIMPL Windows’ Programming Manager
All logic symbols necessary for the SIMPL Windows program must be added from
the Symbol Library in the Programming Manager workspace. In this example, drag
and drop two Interlock symbols from the Memory folder into the Logic folder in
Program View. Expand the Logic folder and double click on both Interlock icons for
a detail view (alternatively CTRL+D or drag and drop into Detail View). Assign
signals as shown below.
Detail View of a Interlocks (S-1 & S-2) in SIMPL Windows’ Programming Manager
18 • Series 3200 Touchpanels Operations Guide - DOC. 5725