Clarion ADZ625 - Manual (Page 14)

18
ADZ625
Intro tape scan play
The intro tape scan allows the first 10 seconds of
all the tracks on the tape to be played. This func-
tion continues on the tape until it is canceled.
1. Press the [SCN] button to start Intro tape scan.
“SCAN” lights in the display.
2. To cancel the intro tape scan, press the [SCN]
button again. “SCAN” goes off from the dis-
play and the current track continues to play.
∗ When the end of the tape is reached during
the intro tape scan, the tape mechanism auto-
matically reverses direction and continues the
intro tape scan.
∗ If you select another mode during the intro tape
scan, the mechanism automatically makes the
intro tape scan stop when it finds the next track
(APC function).
Tape repeat play
The tape repeat continuously plays the current
track. This function continues automatically until
it is canceled.
1. Press the [RPT] button. “REPEAT” lights in
the display and the current track is repeated.
2. To cancel the repeat play, press the [RPT]
button again. “REPEAT” goes off from the dis-
play and normal play resumes.
Blank tape skip
The blank tape skip allows you to skip blank sec-
tions of tape that are over 12 seconds long.
1. Press and hold the [RPT] button for 1 second
or longer. “BLS” lights in the display and the
mechanism fastforward to the next track se-
lection.
2. To cancel the blank tape skip, press and hold
the [RPT] button again. “BLS” goes off and
normal play resumes.
Notes:
The APC, intro tape scan, tape repeat and blank
skip may not work properly with tapes of the follow-
ing qualities:
• Tapes on which the recording level is too low.
• Tapes on which there is much noise between se-
lections.
• Tapes on which there are long pauses in the middle
of selections.
• Tapes on which there are less than 4 seconds of
blank space between selections.
Tape Operations