Remote control inserting the batteries, Remote control, Remote control unit inserting the batteries – Clarion ADZ625 User Manual

Page 6

Advertising
background image

10

ADZ625

[FUNC]

[ ],[ ]

[ISR]

[MUTE]

[PS/AS]

[RPT]

[ ]

[ ],[ ]

[BAND]

[DISP]

[RDM]

Rear side

AA (SUM-3, IECR-6/1.5V)
Batteries

Rear cover

Remote control unit

Inserting the Batteries

1.Turn the remote control unit over, then slide the

rear cover in the direction of the arrow.

2.Insert the AA (SUM-3, IECR-6/1.5V) batteries

that came with the remote control unit facing in
the directions shown in the figure, then close the
rear cover.

Notes:

Using batteries improperly can cause them to
explode. Take note of the following points:

• When replacing batteries, replace both batteries

with new ones.

• Do not short-circuit, disassemble or heat batteries.

• Do not dispose of batteries into fire or flames.

• Dispose of spent batteries properly.

Receiver for remote
control unit

Operating range: 30˚ in all directions

Signal transmitter

6. REMOTE CONTROL

Advertising