Clarion ADZ625 - Manual (Page 18)

22
ADZ625
CD/MD changer functions
When an optional CD/MD changer is connected
through the CeNET cable, this unit controls all
CD/MD changer functions. This unit can control
a total of 2 changers (MD and/or CD).
Press the [FNC] button and select the CD(MD)
changer mode to start play. If 2 CD(MD) chang-
ers are connected, press the [FNC] button to
select the CD(MD) changer for play.
∗ If “NO MAGA” appears in the display, insert the
magazine into the CD changer. “CHECK” appears
in the display while the player loads (checks) the
magazine.
∗ If “NO DISC” appears in the display, eject the maga-
zine and insert discs into each slot. Then, reinsert
the magazine back into the CD changer.
∗ If “NO DISC” appears in the display, load MDs into
the MD changer.
CAUTION
CD-ROM discs and CD-R discs cannot be
played in the CD changer.
Pausing play
1. Press the [ ] button to pause play.
“PAUSE” appears in the display.
2. To resume play, press the [ ] button again.
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
∗ Title data for CD-text CDs can be displayed with
this unit only when it is connected to CDC655Tz.
● When connected to CDC655z or CDC1255z
Press the [DISP] button to display the title.
● When connected to CDC655Tz
1. Press the [DISP] button to display the title.
2. Each time you press and hold the [DISP] but-
ton for 1 second or longer, the title display
changes in the following order:
User title (disc)
➜ CD-text title (disc) ➜ CD-
text title (track)
➜ user title (disc)...
Notes:
• If the CD playing is not a CD-text CD or no user
title has been input, “USER TTL” appears in the
display.
• If a CD-text CD is not input its disc title or a track
title, “TEXTDTTL” or “TEXTTTTL” appears in the
display.
Switching disc titles and track titles
(MD)
This unit can display disc titles and track titles
already entered on MDs. Titles up to 128 char-
acters long can be displayed by scrolling the titles.
∗ Titles cannot be entered for MDs with this unit.
1. Press the [DISP] button to display the title.
The disc title or track title is displayed.
2. Each time you press and hold the [DISP] but-
ton for 1 second or longer, the display toggles
between the disc title and the track title.
Note:
• If an MD is not input its disc title or a track title,“D
TITLE” or “T TITLE” appears in the display.
Procedure to scroll a title
Set “AUTO SCROLL” to “AUTO” or “OFF”. (The
factory default setting is “AUTO”. Refer to
subsection “Adjusting the way of title scrolling”
in section “Operations Common to Each Mode”.)
● When set to “AUTO”
The title is automatically kept scrolling.
● When set to “OFF”
Press the [T] button to scroll the title.
Selecting a CD/MD
Turn the [PRESET] knob either clockwise or
counterclockwise to select a CD or MD.
∗ Use to select the number of the disc loaded, and
to start play.
Selecting a track
● Track-up
1. Press the [
] button to move ahead to the
beginning of the next track.
2. Each time you press the [ ] button, the
track advances ahead to the beginning of the
next track.
● Track-down
1. Press the [
] button to move back to the
beginning of the current track.
2. Press the [ ] button twice to move to the
beginning of the previous track.
CD/MD Changer Operations
8. OPERATIONS OF ACCESSORIES