Dell XPS 15Z (L511Z, Mid 2011) - Manual (Page 44)

44 Power-Button Board
Replacing the Power-Button Board
1 Follow the instructions in "Before You Begin" on page 9.
2 Use the alignment posts to place the power-button board on the palm-rest
assembly.
3 Replace the two screws that secure the power-button board to the
palm-rest assembly.
4 Slide the power-button board cable into the connector on the system
board and press down on the connector latch to secure the cable.
5 Replace the heat sink (see "Replacing the Heat Sink" on page 58).
6 Replace the fan (see "Replacing the Fan" on page 56).
7 Replace the battery (see "Replacing the Battery" on page 18).
8 Replace the base cover (see "Replacing the Base Cover" on page 15).
1 screws (2) 2 power-button board
3 power-button board cable connector
1
2
3
book.book Page 44 Friday, February 21, 2014 12:07 PM