Display, Display assembly, Removing the display assembly – Dell XPS 15Z (L511Z, Mid 2011) User Manual
Page 81
Display
81
19
Display
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your
computer. Damage due to servicing that is not authorized by Dell™ is not covered
by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery
(see "Removing the Battery" on page 17) before working inside the computer.
Display Assembly
Removing the Display Assembly
1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the base cover (see "Removing the Base Cover" on page 13).
3 Remove the battery (see "Removing the Battery" on page 17).
4 Follow the instructions from step 5 to step 16 in Removing the System
5 Remove the six screws that secure the display assembly to the palm-rest
assembly.
6 Note the routing of camera cable, display cable, and Mini-Card antenna
cables and remove the cables from the routing guides.
7 Lift the palm-rest assembly away from the display assembly.
book.book Page 81 Friday, February 21, 2014 12:07 PM