Removing the fan, 6 lift the fan away from the palm-rest assembly – Dell XPS 15Z (L511Z, Mid 2011) User Manual

Page 55

Advertising
background image

Fan

55

13

Fan

WARNING:

Before working inside your computer, read the safety information

that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.

WARNING:

If you remove the fan from the computer when the heat sink is hot,

do

not touch the metal housing of the heat sink.

CAUTION:

Only a certified service technician should perform repairs on your

computer. Damage due to servicing that is not authorized by Dell™ is not covered
by your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist

grounding strap or by periodically touching an unpainted metal surface (such as a
connector on your computer).

CAUTION:

To help prevent damage to the system board, remove the main battery

(see "Removing the Battery" on page 17) before working inside the computer.

Removing the Fan

1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the base cover (see "Removing the Base Cover" on page 13).
3 Remove the battery (see "Removing the Battery" on page 17).
4 Disconnect the fan cable from the system-board connector.
5 Remove the two screws that secure the fan to the palm-rest assembly.
6 Lift the fan away from the palm-rest assembly.

book.book Page 55 Friday, February 21, 2014 12:07 PM

Advertising