Palm-rest assembly, Removing the palm-rest assembly – Dell XPS 15Z (L511Z, Mid 2011) User Manual

Page 77

Advertising
background image

Palm-Rest Assembly

77

18

Palm-Rest Assembly

WARNING:

Before working inside your computer, read the safety information

that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.

CAUTION:

Only a certified service technician should perform repairs on your

computer. Damage due to servicing that is not authorized by Dell™ is not covered
by your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist

grounding strap or by periodically touching an unpainted metal surface (such as a
connector on your computer).

CAUTION:

To help prevent damage to the system board, remove the main battery

(see "Removing the Battery" on page 17) before working inside the computer.

Removing the Palm-Rest Assembly

1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the base cover (see "Removing the Base Cover" on page 13).
3 Remove the battery (see "Removing the Battery" on page 17).
4 Follow the instructions from step 5 to step 16 in Removing the System

Board.

5 Remove the keyboard (see "Removing the Keyboard" on page 69).
6 Remove the speakers (see "Removing the Speakers" on page 73).
7 Remove the power-button board (see "Removing the Power-Button Board"

on page 43).

8 Remove the ac-adapter connector (see "Removing the AC-Adapter

Connector" on page 39).

9 Remove the audio board (see "Removing the Audio Board" on page 47).

10 Remove the battery status-light board (see "Removing the Battery Status-

Light Board" on page 51).

book.book Page 77 Friday, February 21, 2014 12:07 PM

Advertising