Dell UPS 1000T - Manual (Page 135)

ULNM with Xen Virtualized Architecture 135
The following is the command line TCP/UPD for configuration 1 to enable communication between the
Dell ULNM and Dell Network Management Card:
iptables -I OUTPUT -p tcp --dport 80 -j ACCEPT
iptables -I INPUT -p tcp --dport 4679 -j ACCEPT
iptables -I INPUT -p tcp --dport 4680 -j ACCEPT
iptables -I INPUT -p udp --dport 4679 -j ACCEPT
iptables -I INPUT -p udp --dport 4680 -j ACCEPT
iptables -I OUTPUT -p udp --dport 4679 -j ACCEPT
iptables -I OUTPUT -p udp --dport 4680 -j ACCEPT
service iptables save
The following is the command line TCP/UPD for configuration 2 to enable communication between the
Dell ULNM and Dell UPS Network Management Card:
iptables -I OUTPUT -p tcp --dport 80 -j ACCEPT
iptables -I INPUT -p tcp --dport 4679 -j ACCEPT
iptables -I INPUT -p tcp --dport 4680 -j ACCEPT
iptables -I INPUT -p udp --dport 2844 -j ACCEPT
iptables -I INPUT -p udp --dport 2845 -j ACCEPT
iptables -I OUTPUT -p udp --dport 2844 -j ACCEPT
iptables -I OUTPUT -p udp --dport 2845 -j ACCEPT
service iptables save
iptables-save
Dell ULNM Installation (RHEL 5 and Debian 5.0)
Download the latest version of Dell ULNM for Linux from http://www.dellups.com/ and refer to the
installation instructions.
Silent Installation
For silent Dell ULNM installation process, please refer to “Silent Installation” on page 25.
References
• http://www.xen.org/files/Marketing/WhatisXen.pdf
• http://www.howtoforge.com/virtualization-with-xenserver-5.5.0
• http://docs.vmd.citrix.com/XenServer/4.0.1/reference/ch05s04.html
0120_3-Dell ULNM UG.book Page 135 Saturday, November 2, 2013 5:34 PM