Dell UPS 1000T - Manual (Page 64)

Supervision 64
4
Supervision
This chapter describes supervision features in the Dell UPS Local Node Manager (ULNM).
Access to the Monitoring Interface
To monitor the Power Source, start the main Dell ULNM interface. You can access the interface locally
or remotely.
Local Access
From the system where Dell ULNM is installed, you can use the following shortcut:
1 Start Program > Dell > UPS Local Node Manager and open the Dell ULNM.
2 From a local machine, you can type either of the following URLs in a Web browser:
http://127.0.0.1:4679/
Or
https://127.0.0.1:4680/
Remote Access
1 From a remote machine, you can type either of the following URLs in a Web browser:
https://<name or IP address of computer hosting Dell ULNM>:4680/
Or
http://<name or IP address of computer hosting Dell ULNM >:4679/
2 In SSL mode, accept the certificate using the procedure provided by your browser.
3 Enter the Login and Password.
Power Source
From the Views > Power Source menu item, you can (see Figure 48):
• Supervise the information from the UPS that powers the Dell ULNM computer
• Drag and drop the panels
0120_3-Dell ULNM UG.book Page 64 Saturday, November 2, 2013 5:34 PM