Clarion CX501 - Manual (Page 11)

Basic Operations
Eng
lis
h
11
CX501
3-1. Each time you turn the [ ROTARY] knob to
select the setting, the setting changes in
the following order:
“
THROUGH” “60” “90” “120”
∗ The factory default setting is “ THROUGH ”.
Adjusting the subwoofer output
volume
You can adjust the volume output from the unit’s
subwoofer output terminal.
2-1. Select “
S-W VOL”.
3-1. Turn the [ ROTARY] knob to increase or
decrease the subwoofer volume.
∗ The factory default setting is “ 0 ”.
(Adjustment range: +6 to –6)
Setting the phase
2-1. Select “ PHASE”.
3-1. Turn the [ ROTARY] knob to select as
following order:
“
NORMAL” “REVERSE”
∗ The factory default setting is “ NORMAL ”.
Adjusting the high pass filter
2-1. Select “ HPF”.
3-1. Each time you turn the [ ROTARY] knob to
select the setting, the setting changes in
the following order:
“
THROUGH” ↔
“60”
↔
“90”
↔
“120”
∗ The factory default setting is “THROUGH”
(through).
Note:
• During SOUND adjustment mode, if no operation
is performed for more than 10 seconds, this
mode can be cancelled and return to previous
mode.
CX501_ENG.book Page 11 Thursday, November 4, 2010 3:55 PM