Clarion CX501 - Manual (Page 26)

Operations Common to Each Mode
Eng
lis
h
26
CX501
•
When the ENTER PERSONAL
CODE screen appears
The ENTER PERSONAL CODE screen will be
displayed when turning the ACC power on after
performing the following operations:
• The car battery was replaced.
• The backup power was cut off.
• The [
RESET] button was pressed.
Note:
• If you have lost your Personal Code, please
contact Clarion customer service.
1. Enter your Personal Code currently set.
2. When the correct Personal Code is entered,
the unit will restart from the initial startup
screen.
Notes:
• When you enter a wrong Personal Code, the
message “ LOCK - - - -” is displayed and the
Personal Code entry is prohibited for a while.
This prohibited time is changed according to the
number of times of wrong code entry as follows:
• 1 to 6 times: 15 seconds
• 7 times or more: 15 minutes
Turning the screen saver function on
or off
This unit is provided with the screen saver
function which allows you to show various kinds
of patterns and characters in the operation
status indication area of the display in a random
order. You can turn on or off this function. If the
button operation is performed with the screen
saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
∗ The factory default setting is “ON”.
2-1. Select “ SCRN SVR”.
3-1. Turn the [ ROTARY] knob to select the
setting.
Each time you turn the [
ROTARY] knob,
the setting changes in the following order:
“
OFF” “ON”
Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA title.
∗ The factory default setting is “ON”.
2-1. Select “ SCROLL”.
3-1. Turn the [ ROTARY] knob to select “ON” or
“ OFF”.
• ON:
To scroll automatically.
• OFF:
To scroll just 1 time.
Setting the dimmer control
You can set the dimmer control “ ON” or “OFF”.
∗ The factory default setting is “ON”.
2-1. Select “ DIMMER”.
3-1. Turn the [ ROTARY] knob to select “ON” or
“ OFF”.
Anti-theft indicator
The red Anti-theft indicator is a function for
preventing theft. When the ACC is off, this
indicator blinks.
∗ The factory default setting is “OFF”.
2-1. Select “ BLINKLED”.
3-1. Turn the [ ROTARY] knob to select “ON” or
“ OFF”.
Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold cable, you can listen to
your telephone calls on your car speakers.
∗ The factory default setting is “OFF”.
2-1. Select “ INT-SW”.
3-1. Turn the [ ROTARY] knob to select the
setting. Each time you turn the [ ROTARY]
knob, the setting changes in the following
order:
“
OFF” “MUTE”
• OFF:
This unit continues normal operation even
when the cellular phone is used.
• MUTE:
The sound from this unit is muted during
telephone calls.
CX501_ENG.book Page 26 Thursday, November 4, 2010 3:55 PM