Dell PowerEdge R905 - Manual (Page 23)

About Your System
23
E122A CPU # VTT Processor # VTT voltage
has exceeded the
allowable voltage range See "Getting Help" on
page 181.
E122D CPU # VDDIO Processor # VDDIO
voltage has exceeded the
allowable voltage range See "Getting Help" on
page 181.
E122E CPU # VDDA Processor # VDDA
voltage has exceeded the
allowable voltage range See "Getting Help" on
page 181.
E122F 2.5V PwrGd 2.5V voltage regulator has
failed. See "Getting Help" on
page 181.
E1231 1.2V HTCORE
PwrGd
1.2V HTCORE voltage
regulator has failed. See "Getting Help" on
page 181.
E1232 VDD 12V PS#
PwrGd
The specified power
supply has failed or has
been removed from the
bay while the system
was on. If removed, reinsert the
power supply into the bay
and reconnect to power.
For component failures,
see "Getting Help" on
page 181.
E123B LOM Mezz
PwrGd
Voltage regulator for the
NIC daughter card has
failed. Recycle power to the
system or clear the SEL. If
the problem persists, see
"Getting Help" on
page 181.
E123C Planar LOM
PwrGd
Voltage regulator for the
integrated NIC has failed. Recycle power to the
system or clear the SEL. If
the problem persists, see
"Getting Help" on
page 181.
E1310 RPM Fan ## RPM of specified cooling
fan is out of acceptable
operating range. See "Troubleshooting
System Cooling
Problems" on page 157.
Table 1-7. LCD Status Messages (continued)
Line 1
Message Line 2
Message Causes Corrective Actions