CyberData VoIP Loudspeaker Amplifier Part #010859 - Manual (Page 26)

CyberData Corporation 930111F VoIP Loudspeaker Amplifier Operations Guide
Installing the VoIP Loudspeaker Amplifier
Configure the Loudspeaker Amplifier Parameters
18
3. After changing the parameters, click Save Settings. This updates the changed parameters and
reboots the speaker if appropriate.
4. Connect the speaker to the target network.
5. From a system on the same network as the speaker, open a browser with the new IP address of
the speaker.
Link to the Speaker Setup page.
Link to the SIP Setup page.
Link to the MGROUPS Setup page.
Link to the Upgrade Firmware page.
Link to the Home page.
Table 2-9. Network Setup Parameters (continued)
Web Page Item Description