CyberData VoIP Loudspeaker Amplifier Part #010859 - Manual (Page 9)

1
VoIP Loudspeaker Amplifier Operations Guide 930111F CyberData Corporation
1 Product Overview
The Voice-over-IP (VoIP) Loudspeaker Amplifier (AC powered) uses a single cable to connect to
existing LANs to broadcast digital audio over your public address system. The small footprint and
low height makes this an ideal loudspeaker amplifier to discreetly mount almost anywhere.
1.1 Typical System Installation
Figure 1-1 illustrates how the VoIP Loudspeaker Amplifier (AC Powered) is normally installed as
part of a public address system. Prior to installation, do the following:
● Create a plan for the locations of your loudspeaker amplifiers.
● Consult local building and electrical code requirements.
Figure 1-1. Public Address System
Generic PoE Hub
Server VoIP Phone
1 2 3 4 5 6
VoIP Loudspeaker Amplifiers—AC Required