Dell Alienware M18x R2 (Early 2012) - Manual (Page 14)

14 | Removing the Base Cover
Removing the Base Cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Prerequisites
Remove the battery pack. See "Removing the Battery Pack" on page 12.
Procedure
1 Remove the screws that secure the base cover to the computer base.
2 Slide the base cover toward the back of the computer, and then lift it up to remove it
from the computer.
1 screws (4) 2 base cover
5
1
2
Book.book Page 14 Thursday, June 7, 2012 3:01 PM