Dell Alienware M18x R2 (Early 2012) - Manual (Page 68)

70 | Removing the Video-Card Heat-Sink(s)
Removing the Video-Card
Heat-Sink(s)
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the battery pack. See "Removing the Battery Pack" on page 12.
2 Remove the base cover. See "Removing the Base Cover" on page 14.
3 Remove the center control cover. See "Removing the Center Control Cover" on
page 26.
4 Remove the keyboard. See "Removing the Keyboard" on page 32.
5 Remove the macro keyboard. See "Removing the Macro Keyboard" on page 36.
6 Remove the display assembly. See “Removing the Display Assembly” on page 43.
7 Follow the instructions from step 1 to step 7 in Removing the Palm Rest.
Procedure
1 Loosen the captive screws that secure the primary video-card heat-sink to the
computer base.
2 Loosen the captive screws that secure the secondary video-card heat-sink to the
computer base.
3 Lift the video-card heat-sink(s) off the video card(s).
37
Book.book Page 70 Thursday, June 7, 2012 3:01 PM