Chaparral VFS113 - Manual (Page 78)

VFS113 Rack/Desktop Model User’s Guide
D-4
3 Select Ethernet Config and press Enter.
The Network Management System Console screen displays.
From here you can access the LAN settings. Each screen and its settings are
described briefly in the following sections. These settings are intended for use by
experienced network administrators. Refer to your operating system documentation
for more information about these settings.
System Configuration Screen
Option 1 from the Network Management System Console screen displays the System
Configuration screen.
Table D-1 describes the settings you can change here.
Table D-1. System Configuration screen settings
Option Setting Description
1 System name Name of the router as seen by other systems on the network.
You can enter up to 80 characters. Default is router fxxxxx
where xxxxx is the last 5 digits of the MAC address.
2 System Contact Name of a contact person responsible for the router. You can
enter up to 80 characters.