Chaparral VFS113 - Manual (Page 93)

Index
I-5
software
accessing to configure the router 1
navigating in 5
specifications 4
ST light 11
status lights 11
support 1
System Configuration screen 4
System Menu 2, 5
T
table, installing the router on 2
TCP/IP
configuring the router 1
setting up to access controller software 3, 1
using ARP to set up 2
using DHCP to set up 3
TCP/IP Configuration screen 5
technical support 1
temperature, alarm thresholds for 18
terminal
screen problems 5
terminal emulator software 1
terminal emulator, problems with 4
terminal screen problems 4
termination
disabling 13
Termination screen 13
time, changing for router 14
topology
LOOP setting 7
POINT-TO-POINT setting 7
selecting 7
troubleshooting
COM port 4
device SCSI channel problems 5
problems during bootup 1
router not responding 6
terminal emulator 4
typographic conventions 2
U
unpacking the router 1
upgrading firmware 31
Utilities Menu 28, 8
V
VFS113
benefits 2
changing the date 14
changing the initiator ID 12
changing the Loop ID 8
changing the LUN 10
changing the scan delay 15
changing the SCSI ID 12
changing the time 14
configuring 1
connecting to the FC port 8
connecting to the RS-232 port 9
connecting to the SCSI channels 7
disabling the alarm 16
displaying configuration information 27
displaying devices connected to 23
displaying events 24
displaying hardware information 27
displaying its FC LUN 30
enabling the alarm 16
features 2
installing 1
installing in a rack 3
installing on a desktop or table 2
making the data connections 7
rebooting 19
restoring default settings 18
selecting the topology 7
specifications 4
unpacking 1
upgrading firmware 31
voltage, alarm thresholds for 18