Dell PowerVault 35F (Fibre Channel Bridge) - Manual (Page 18)

Installing the PowerVault 35F: Dell PowerVault 35F User's Guide
file:///C|/Users/rishi_sood/Desktop/35F/ug/install.htm[3/21/2013 11:16:18 AM]
Connecting the power cord
The PowerVault 35F is shipped with the appropriate power cord for use in your region or country.
To connect the power cord to the PowerVault 35F:
1. Make sure the PowerVault 35F’s power is switched off. See Fig. 11 for the location of the power switch on the
back of the bridge.
2. Connect the appropriate end of the power cord to the power connector on the back of the PowerVault 35F.
3. Plug the three-pronged end of the power cord into the power source.
Figure 11. PowerVault 35F power switch and outlet
Back to Contents Page