Dell PowerVault 35F (Fibre Channel Bridge) - Manual (Page 32)

Configuring the PowerVault 35F: Dell PowerVault 35F User's Guide
file:///C|/Users/rishi_sood/Desktop/35F/ug/config_2.htm[3/21/2013 11:16:19 AM]
Save Configuration
This option saves the current configuration state in FLASH, and updates the saved previous configuration state.
Restore Last Saved Configuration
This option restores the most recent previously saved configuration. This can be useful when configuration changes
are made, but the user wishes to return to the previously configured state.
Reset Configuration to Factory Defaults
This option resets all configuration options to the factory defaults.
Display Status of Power-on Self Test
This option displays the results of the most recent power on self test (POST). The POST test results should be similar
to those shown below:
Once the POST has displayed, press any key to return to the main PowerVault 35F menu.