Dell PowerVault 35F (Fibre Channel Bridge) - Manual (Page 33)

Configuring the PowerVault 35F: Dell PowerVault 35F User's Guide
file:///C|/Users/rishi_sood/Desktop/35F/ug/config_2.htm[3/21/2013 11:16:19 AM]
Advanced Options
The Advanced Options menu allows you to configure the PowerVault 35F, display trace and assertion history for
troubleshooting purposes, and download a new revision of firmware, if necessary. If you select this option from the
main menu, you should see a menu similar to the one below:
Perform Configuration
The configuration menu allows the administrator to configure the various options on the PowerVault 35F. For any
configuration changes to take effect, you must reboot the PowerVault 35F.
When you select 1) Perform configuration from the Advanced Options menu, you should see a menu similar to the
following:
NOTE: If you do not select A) Save Configuration, when exiting the Configuration Menu, you will be asked if
you would like to save current configuration changes. Configuration changes will take effect after the next PowerVault
35F reboot.
Baud Rate Configuration
This option changes the baud rate used on the serial port. Select 1) – 5) for appropriate baud rate setting. If you are