Dell PowerVault 35F (Fibre Channel Bridge) User Manual
Page 44
Troubleshooting: Dell PowerVault 35F User's Guide
file:///C|/Users/rishi_sood/Desktop/35F/ug/debug.htm[3/21/2013 11:16:20 AM]
PowerVault 35F.
Hyperterminal Setup:
1. Click TRANSFER on the tool bar.
2. Click CAPTURE TEXT on the menu.
3. Enter a file name for the captured information to go to. This should be a .txt file.
4. Click START.
PowerVault 35F Setup:
1. From the Configuration Menu, select 6) Trace Settings Configuration.
2. Toggle levels 0, 1, 2, and 3 to ON. Press X to return to the Configuration Menu.
3. Select A) Save Configuration. Press X to return to the Main Menu.
4. Reboot the PowerVault 35F.
5. At this point, perform the operation you wish to be traced.
6. When the operation is complete, or fails, enter 2) Display Trace and Assertion History from the Main Menu.
7. Enter 1) Display trace for current boot cycle.
8. From the Configuration Menu, Enter options 2) Display trace from previous boot cycle, 3) Display trace from
last assertion failure, and 5) Clear current trace buffer so we will know how the PowerVault 35F is
configured when we receive your trace.
9. On Hyperterminal, click TRANSFER, CAPTURE TEXT, STOP. Ensure the .txt capture file is filled.
10. Forward the trace information in the captured .txt file to your Dell tech support representative.