Dell PowerEdge T310 - Manual (Page 174)

174
Jumpers and Connectors
Power Distribution Board Connectors
Disabling a Forgotten Password
The system's software security features include a system password and a setup
password, which are discussed in detail in "Using the System Setup Program."
The password jumper enables these password features or disables them and
clears any password(s) currently in use.
CAUTION:
See "Protecting Against Electrostatic Discharge" in the safety
instructions that came with the system.
1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2 Open the system. See "Opening and Closing the System."
1 J_PWR1 connector 2 J_PWR2 connector
1
2
book.book Page 174 Wednesday, August 19, 2009 4:40 PM