See "removing a hot-swap – Dell PowerEdge T310 User Manual
Page 94
Advertising
94
Installing System Components
Removing a Hot-Swap Hard Drive From a Hard-Drive Carrier
Remove the screws from the slide rails on the hard-drive carrier and separate
the hard drive from the carrier. See Figure 3-9.
Figure 3-9.
Removing and Installing a Hot-Swap Hard Drive
1
hard drive
2
screws (4)
3
SAS/SATA screw hole
4
hard-drive carrier
1
4
2
3
book.book Page 94 Wednesday, August 19, 2009 4:40 PM
Advertising