Dell PowerEdge C8000 - Manual (Page 10)

10
14
Align the left air baffle with the screw holes on the front of the sled cover.
15
Secure the left air baffle to the sled cover using the two M3 screws. Tighten the screws to
5.21 in-lbs.
Figure 1-8. Installing the Left Air Baffle
Installing the Back Tesla K20 GPGPU card
1
Release the cables from the retaining clips and slightly lift the cables to access the screws on
the sled cover.
Figure 1-9. Releasing the Power and Emergency Throttling Cables
1 left air baffle 2 M3 screws (2)
3 Tesla K20 GPGPU card assembly
1 power and emergency throttling cables
1
2
3
1