Dell PowerEdge C8000 - Manual (Page 9)

9
10
Connect the power cables to the GPGPU card. Ensure the cables are properly attached.
11
Connect the emergency throttling cable to the GPGPU card. See Figure 1-17 for the cable
routing diagram.
Figure 1-6. Connecting the Power and Emergency Throttling Cables
12
Align and insert the GPGPU card assembly into the front GPGPU card riser connector until
the card is fully seated.
13
Secure the GPGPU card to the front of the sled cover using the four M3 screws, working in a
clockwise sequence. Tighten the screws to 5.21 in-lbs.
Figure 1-7. Installing the Front GPGPU Card Assembly
1, 2 power cables 3 emergency throttling cable
1 M3 screws (4) 2 Tesla K20 GPGPU card assembly
3 front GPGPU card riser
1
2
3
2 3
1