Dell PowerEdge C8000 - Manual (Page 14)

14
15
Align the left air baffle with the screw holes on the back of the sled cover.
16
Secure the left air baffle to the sled cover using the two M3 screws. Tighten the screws to
5.21 in-lb.
17
Route the cables along the inside wall of the sled cover.
18
Secure the cables to the retaining clips.
Figure 1-16. Installing the Left Air Baffle
19
Replace the top cover.
20
Close the sled.
21
Replace the sled in the server enclosure.
1 left air baffle 2 M3 screws (2)
3 power and emergency throttling cables 4 retaining clips (3)
1
2
3
4