Dell PowerEdge C8000 - Manual (Page 12)

12
7
Align the right air baffle with the screw holes on the back of the sled cover.
8
Secure the right air baffle to the sled cover using the two M3 screws. Tighten the screws to
5.21 in-lb.
Figure 1-12. Installing the Right Air Baffle
9
Align the front mounting bracket with the screw holes on the left of the GPGPU card and
secure with two M3 screws. Tighten the screws to 5.21 in-lb.
10
Align the back mounting bracket with the screw holes on the right of the GPGPU card and
secure with two M3 screws. Tighten the screws to 5.21 in-lb.
Figure 1-13. Installing the Mounting Brackets
1 M3 screws (2) 2 right air baffle
1 M3 screws (4) 2 front mounting bracket
3 Tesla K20 GPGPU card 4 back mounting bracket
1 2
1
2
3
4