CyberPower Systems Network Management Card - Manual (Page 16)

Cyber Power Network Management System
14
1.
Input the manager IP address. This address will limit the access to the NMS. The default
value 0.0.0.0 or 255.255.255.255 allows access for all NMS.
2. Input the community (functions as password, maximum of 15 characters).
3. Select one of the permission options: [Read], [Write], or [Disable].
4. Click [Apply] to activate the settings, click [Cancel] to revert to previous inputs.
Definitions for Permission levels:
Read The NMS can read data at any time, but can never write data.
Write The NMS can read and write data at any time (provided there is not
another user logged in).
Disabled The NMS cannot use ‘Read’ or ‘Write’.
[Trap Notification]: Identify NMS that will receive traps.