CyberPower Systems Network Management Card - Manual (Page 9)

Cyber Power Network Management System
7
CONFIGURATION GUIDE
[Monitoring] menu contains [Current Status] page and [UPS Information] page
[Current Status] displays basic information of UPS current status.
Status Field Definition
Input Line Voltage Shows the current input voltage of the utility power
Output Frequency Displays the frequency of the utility power
Maximum Line Voltage
Identifies the highest voltage of the utility power input to
the UPS during the previous minute of operation.
Minimum Line Voltage
Identifies the lowest voltage of the utility power input to
the UPS during the previous minute of operation.
Output Voltage Shows the output voltage of the UPS.
UPS Load
Shows the percent of battery capacity that is currently
being used.
Internal Temperature Displays the internal operating temperature of the UPS.
Battery Capacity Displays the current battery charge level.
On Battery Time
Displays the battery time available. This display factors
in the UPS load and the Battery Capacity.