Dell DX6004S User Manual
Page 134
134
Installing System Components
11 Remove all the memory modules. See "Removing Memory Modules" on
NOTE:
To ensure proper reinstallation of memory modules, record the
memory module socket locations.
12 Carefully route any loose cables away from the edges of the system board.
13 Remove the screws securing the system board to the chassis and then slide
the system board assembly toward the front of the chassis.
CAUTION:
Do not lift the system board assembly by grasping a memory module,
processor, or other components.
14 Grasp the system board assembly by its edges and lift the assembly away
from the chassis. See Figure 3-24.
Figure 3-24. Removing and Installing the System Board
1
screws (9)
2
system board assembly
11
2
book.book.book Page 134 Tuesday, September 7, 2010 8:45 PM