Dell DX6004S User Manual
Page 94
Advertising
94
Installing System Components
CAUTION:
Never operate your system with the cooling shroud removed. The
system may get overheated quickly, resulting in shutdown of the system and loss of
data.
1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2 Open the system. See "Opening the System" on page 76.
3 Remove the SAS backplane cables routed over the shroud from the system
board.
4 Hold the touch points and gently lift the shroud straight up and away from
the system board. See Figure 3-10.
Figure 3-10. Removing and Installing the Cooling Shroud
1
power distribution board shroud
2
system board shroud
3
tabs (2)
4
fan bay numbers
1
2
3
4
book.book.book Page 94 Tuesday, September 7, 2010 8:45 PM
Advertising